2005 Mazda 3 "check faulty fuel injector" Questions

...faulty solenoid in the vapor recovery system. The solenoid is sticking open and allowing fumes from expansion of fuel in the fuel tank to enter the air intake and smother the engine. This is how the ...

...check the injector for leaks. 2: If the injector does not operate when the engine that is hard to start is cranked, the following as well as the injector itself may be responsible. (1) Faulty power ...

...check next? oh if it helps my car has single coil on plug so i dont believe it to be the coils. p0171 is fuel injection system too lean - bank 1 possible causes - Intake air leaks - Faulty front ...

...Faulty catalytic converter(s) Running out of fuel Poor compression Defective computer p1409 EGR Vacuum System Leak - Read Our Article on EGR Valve Codes For Help With This Oldsmobile Check Engine ...

...Faulty Choke. 20 Inspect Distributor Worn, Loose, or Incorrectly Installed Distributor. You may also want to check crank sensor signal. Unplug crank sensor located by crankshaft pulley and plug back ...

...check. Priority Action Part Type Cause 1 Inspect Battery Battery Discharged or Faulty. 2 Inspect Battery Cable Corroded, Broken, Shorted or Poorly Connected Battery Cable. 3 Inspect Distributor Cap ...

fuel rail? If so have you checked the injectors. If the problem is located in the injectors then there are two possible problems: 1...All of your injectors are clogged. Highly unlikely but possible. 2

...Faulty Fuel Pump Relay. 12 Inspect Fuel Injector Pressure Regulator Faulty Fuel Injector Pressure Regulator. 13 Inspect Ignition Switch Improperly Connected or Faulty Ignition Switch. 14 Inspect ...

...faulty,damaged,leaking,etc. may not improve any performance. have checked and diagnosed by a good technician. "I hope this helped you out, if so let me know by pressing the helpful button. Check out ...

...faulty coil, water in the fuel, or a fuel pressure issue. Diagnostics will need to be run to narrow the problem down to the source. change spark plug and wire. If persists, check for gasket leak and ...