2002 Nissan Xterra "dipstick guide tube" Questions

Ad

...Guide into dipstick tube slowly and gently rotate at first resistance until the dipstick enters completely. Reverse the above hand positions if you are left handed. First get a flashlight and see if ...

Ad

Question about Nissan Xterra

1 Answer

...dipstick tube bolt, then remove the wiring harness from the dipstick tube. 7. Remove the 3 mounting bolts. 8. Lower the vehicle. 9. Remove engine oil dipstick tube. 10. Roll and carefully remove the ...

Ad

...dipstick tube to clean out a blockage? How is it held in place? the dip stick tube is a straight tube that guides the dip stick down to the oil unless it is severely bent, it will not be ...

Question about Nissan Xterra

1 Answer

...dipstick and inspect fluid level. It should be in the cross-hatched area. 9. If necessary, add fluid in 1/2 pint (250 ml) increments through the filler tube until the level is correct at normal ...

Question about Nissan Xterra

1 Answer

...dipstick no year, ? what are you saying? i do the official A/T dip check hot, all steps and its too high. im driving and the top of dip stick leaks ATF? never ,ever guess on how to add ATF to any A/T ...

...dipstick tube I've never had to remove the exhaust. The times I have trouble is when I put the tube in the wrong hole between the exhaust ports. Those things aren't perfect either. Once close, use a ...

...dipstick tube.... won't go in at all.... any suggestions? Remove the cross member, remove the torque converter bolts and back the bell housing bolts out about an inch, so the transmission will drop ...

Question about Nissan Xterra

1 Answer

...engine compartment];on the drivers side.look for a yellow handle.note location of dipstick tube.by using a long funnel,add fluid through dipstick tube.check owners guide in glove box.do not over ...

...dipstick tube on 5.9L 1985 Jeep J20 engine or trans.? lost the operator guide? ah it not a GC. seen on all jeep dealer parts pages. part ID ...

Question about Nissan Xterra

1 Answer

dipstick guide tube. - Replace O-ring. - Remove front end reinforcement. - Detach steeling spindle from steering gear. - Remove vane pump for power steering unit (lines remain connected). - Disconnect

Not finding what you are looking for?
2002 Nissan Xterra Logo

880 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...