2002 Nissan Altima "hvac drain line" Questions

...HVAC system was not in use when the car was just sitting there filling up with water. Wish me luck. I am curious how many 2009 Altima's are having this problem and if Nissan is just trying to avoid ...

...drain tube. Remove the inside and outside module attaching bolts and the accumulator mounting bracket bolt. Remove the IP carrier. Remove the floor air outlet. Disconnect the wiring harness from the ...

drain hose that allows moisture to exit the HVAC system is clooged with debri and prevents the water from exiting the HVAC area. Open the hood and you will see a rubber hose that has an opening on the

...Drain - Removal). Remove the nut (1) that secures the passenger side of the HVAC housing (2) to the dash panel (3). NOTE Use care to ensure that the interior is covered in case of loss of residual ...

HVAC module, attaching a new seal onto the drain tube. Attach the core cover from the right side, sliding it up and forward into position. #Step 2 Align the drain tube with the front dash hole and the

...be caused by a plugged AC condensate drain line, a leaking heater core, leaking windshield seal, a problem with sunroof drains or water ingestion from the fresh air intake on your car's HVAC

...HVAC module,attaching a new seal onto the drain tube. Attach the core cover from the rightside, sliding it up and forward into position. 2. Align the draintube with the front dash hole and the core ...

...available for 2007 - 2009 Explorer. Usually the smell is trapped water in the hvac box due to a plugged drain line. The water is supposed to drain onto the ground under the truck when the ac is

...drain the coolant . Remove the evaporator outlet hose and liquid line nut from the thermal expansion valve (TXV). Remove the evaporator outlet hose from the TXV. Remove and discard the sealing washer ...

...HVAC housing to the dash panel. Be certain that the evaporator condensate drain tube and the housing mounting studs are inserted into their correct mounting holes. Install the HVAC housing mounting ...