2000 Mitsubishi Galant "tighten door mirror" Questions

Ad

Question about Mitsubishi Galant

1 Answer

...door panel. Lift panel and pull slighlty towards you. Disconnect courtesy light, and wire to speaker. This may sound like alot but it goes pretty fast. 2. Peel away plastic and loosen window glass ...

Ad

...tighten side mirror. 1996 dodge ram 1500 truck.? manual mirrors take door pannal off there should be 3 bolts in the inside of the door where mirror sits unless its the reflection peace where you have ...

Ad

...it? May have to pull inside door panel to do it. Check with hyundai Remove inner door panel then remove panel behind mirror. Tighten the 3 bolts holding the mirror to door. Put door back

...door panel behind a cover (usually a triangular shaped cover), that you will have to tighten. If the mirror glass is loose you should find a hole underneath the mirror housing where you have to put a ...

...tighten it Most mirrors have a removable cover just on the inside of the door. If you look closely where the mirror meets the door on the inside should be a snap in place cover or three screw holes ...

Question about Mitsubishi Galant

1 Answer

door mirror is working loose. The whole cowling is moving about. How do i tighten it.? John you may have to take the small panel off on the inside of the window oppersite the mirror it should prye off

Question about Mitsubishi Galant

1 Answer

...If it's the door mirror, the inner trim on the door needs to be removed to tighten the mounting bolts. If the outside foldaway joint is loose, you will probably need to replace the complete

tighten the side mirror on a hummer H3 the mirror vibrates and shakes OK. Just to make it clear it was the mirror vibrating on the swivel not vibrating on the door. I went to the store and purchased a

Question about Mitsubishi Galant

1 Answer

...door. Step 2 Install and tighten the three retaining screws you took off when removing the old mirror. Step 3 Connect the power mirror wiring to the connection located on the door panel. Replace the ...

where it attaches to the door panel, you will probably have to remove the inner (inside the car) door panel to gain access the 2 or 3 nuts or bolts that secure the housing to the door and tighten them

Not finding what you are looking for?
2000 Mitsubishi Galant Logo

1,247 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...