2000 Mitsubishi Galant "remove 3 engine" Questions

Ad

Question about Mitsubishi Galant

1 Answer

...remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The ...

Ad

Question about Mitsubishi Galant

1 Answer

remove the head?Or is the head held down by the 12 bolts only?The repair book I have doesn't say anything about the 3 bolts in the middle. there are only 10 head bolts on that engine. the 3 bolts your

Ad

Question about Mitsubishi Galant

1 Answer

...replacing the mounts, if they really need replacing. You can jack up the engine for its mounts, remove one, replace it, then do the same for the other mount. There should only be 2 or 3 at

...engine may be covered by plastic cover,this removes easily 4-6 bolts and allows access to throttle body failing that low idle could be limp mode.it triggers when either a major sensor faults or more ...

...sounds like a bad ground wire,also chech theelectrical plug connection at the throttle body. remove that plug and plug it back in. the 3 ltr and above engines are notorious for having this ...

...engine takes about 3 hours labour. Installing the new one takes about 4 hours. You should replace radiator hoses and clamps. If the radiator is in poor condition, a new one is strongly suggested. So ...

...REMOVE THE COMPRESSOR 3 MOUNTING BOLTS,THEN SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS, MAKE SURE VECHICLE PARK ON SOLID LEVEL GROUND, REMOVE ENGINE UNDER COVER, REMOVE HEAT SHIELD FROM BENEATH THE ...

...hose to where it attaches to the engine. There should be a housing held to the engine by 3 bolts. On the v6 it's much easier to access if you remove the battery and the battery shelf before you

...3 bolts holding the starter and they're easy to remove. You need to disconnect the wire on the starter coil (the coil is located on top of the starter itself). Now the fun part: removing the the ...

on the fuel manifold top check for pressure regulator --pump/ filter faults . Next check for spark at a plug lead. Check that the injectors are working . Missing just 1 of the 3 will not run an engine

Not finding what you are looking for?
2000 Mitsubishi Galant Logo

1,247 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...