2000 GMC Sierra "hub spindle rotor" Questions

Ad

...hub/rotor assembly on the spindle. Keep the assembly centered on the spindle to prevent damage to the grease seal or spindle threads. Install the outer wheel bearing, washer and adjusting nut. Adjust ...

Ad

Question about GMC Sierra

1 Answer

...hub/bearing to spindle. 6) Use slide hammer to remove rotor/hub assembly. 7) Remove 4 bolts attaching rotor to hub. 8) While it is a snug fit, the hub bearing does slide through center of rotor to ...

Ad

...spindle.  The hub (the part that holds the 4 tire studs) is machine-pressed into the wheel bearings which are hidden inside the spindle, so you will have to have the hub pressed out of the ...

Question about GMC Sierra

1 Answer

...hub assembly from the spindle. Remove the snapring and spacer from the end of the spindle shaft. Remove the outer wheel bearing locknut from the spindle using 4 prong spindle nut spanner wrench, ...

hub. Look on the back of the spindle for the 4 bolts that hold in the wheel bearing. Use a 12 point socket to remove the 4 bolts and remove wheel bearing from spindle (out towards the wheel stud side)

...out or you have to slide the rotor off the hub assembly. Slide the new rotor into the hub assembly.Reinstall the brake caliper and make sure the caliper tube is not twisted. Replace the spindle

Question about GMC Sierra

1 Answer

...hub replacement 2WD. 2WD pickups don't have hubs. They have rotors with bearings. Once you have the brake assembly supported, remove nut from spindle. Be sure not to strip the threads on the spindle. ...

...hub housing. You need to take the rotor/hub off the spindle.So you'll need to remove the wheel bearings in order for it to come off. Once off theres bolts in the back of the rotors bolted to the

with strut bolts out remove spindle. at this point i wouls say a press is needed, take to your local shop and ask them to replace the hub. heres a picture of the hub asm. hope this helps you. good day

Question about GMC Sierra

1 Answer

spindle nut is removed, will the hub come off and then the rotor? U use an air hammer with a pointy tool in it. Then u drive the lug studs out. The hub and rotor mate using the knurled area of the lug

Not finding what you are looking for?
2000 GMC Sierra Logo

1,055 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 GMC Sierra
1998 GMC Sierra

971 Questions

1997 GMC Sierra
1997 GMC Sierra

824 Questions

1999 GMC Sierra
1999 GMC Sierra

584 Questions

1994 GMC Sierra
1994 GMC Sierra

587 Questions

1996 GMC Sierra
1996 GMC Sierra

437 Questions

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...