2000 BMW 7 Series "p0011 p0021" Questions

...p0011 and p0021 car runs fine,but when at idle it idles a litle up and down specially with the ac on have your timing checked as these codes suggest that you are advanced on one bank and retarded on ...

...P0011 and P0021 codes. I've reset them and changed the oil but they keep coming back. I need to smog my car within the next few days and I can't figure out what it is. You got two codes for Timing ...

P0021 engine code is basically the same as a P0011 code, except this is for Bank 2, not Bank 1. Symptoms Possible sumptoms of OBD code P0021 Most likely a P0021 DTC will result in one of the following

p0011 and p0021 P0011 "A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)P0021 "A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 2) Hi there:DTC P0011 -

...P0011 DTC trouble code may be caused by one or more of the following: Incorrect camshaft timing Wiring problems (harness/wiring) in intake timing control valve control solenoid system Continuous oil ...

...P0011 (Bank 1); P0021 (Bank 2) - Intake valve timing control performance, There is a gap between angle of target and phase-control angle degree. Causes: - Harness or connectors (Intake valve timing ...

to follow detailed troubleshooting steps, including the ability to test components using a scan tool. Other related DTCs: P0010 - P0011 - P0012 - P0020 - P0021 - P0022 Hope helps (remember rated this)

i have a code of p0011 and p0021 and there is no power at take off both codes indicate timing overadvanced.

...p0011 and p0021 My car is idiling hard and shuting off after water pump was changed.codes p0021 and p0011 keep poping up.it also cut off when start car. Well code 11 is for a problem with the cam ...

Still reading codes 0011 & 0021 after replacing cam position sensors. What else could it be? https://www.obd-codes.com/p0021 Has nothing to do with cam sensors . https://www.obd-codes.com/p0011