2008 Pontiac G6 Sedan "door opening using" Questions

...3 inch down and using only switches on door panels??? turn the key on and hold the window button in up position for ten seconds ,turn key off and then open door and close it , window should go up

About 6 months ago someone tried to break into my driver side door. Ever since, you couldn't unlock the door from the outside with a key. The door would open and close just fine though. About a week ...

...opening and closing the door the light initially goes out only to come back on again, after repeated atempts to keep it off I was forced to turn the dome light off manually. The car is a 2008 model, ...

How do I use the key and not the fob without alarm going off UNLOCK AND LOCK THE DOOR 3 TIMES WITH THE KEY OPENING DOOR AFTER 3RD TIME

How to install a pontiac G6 driver door handle. The handle broke off. I opened the door panel and retrieve the broken piece. Got a new door handle, but it seems impossible to install it without taking

I had my car at the dealership now , my daughter open the door last night on passenger side and would then not stayed closed. 2005 pontiac g6 V6, they think it might be door latch. What am i looking ...

...door is closing properly and adjust toe lock by turning the screws and sliding it in until it works properly. If the above fails chances are you have an electrical harness failure. 3.) pop the hood, ...

...that the window was up about 1/4" and pressed it down. I was then able to raise the window to the 'door open' position (door was open). When I closed the door, the window did not raise the rest of ...

...that the window was up about 1/4" and pressed it down. I was then able to raise the window to the 'door open' position (door was open). When I closed the door, the window did not raise the rest of ...

...opening into the frame and the metal scew holes. b) use a spacer (like a taped quarter(s)) on the door where this plunger makes contact. The other cheapest way after identifying the malfunctioning ...