...blender door motor The blend-air door actuator on a 2008 Merury Grand Marquis is located on the top forward area of the HVAC housing under the instrument panel. Complete instrument ...
...blender door location Location under dashboard The blend-air door actuator on a 2008 Merury Grand Marquis is located on the top forward area of the HVAC housing under the instrument panel. Complete ...
...blender door has to be replaced. This is a costly job that involves removing this plenum after removing the dash. A shortcut I found online was to cut a hole under the blender door and replace it ...
...blender" door. Try getting to it thru the glovebox. Open the glovebox and there should be 4 or so 7mm screws holding it in. It pulls out. You will have to disconnect the little light in there also. ...
...blender actuator on a 1999 ford crown victoria? Yes this is correct. You have to remove the dash to replace the module. This is about an 8 hour job. Start from the passenger side removing all the ...
...blender door manually to get heat on my 2003 ford explorer? I just worked this issue today. It too me a minute because I refuse to remove the dashboard. After working on jets for 20 year, I can work ...
123 questions posted
Usually answered in minutes!
661 Questions
611 Questions
534 Questions
488 Questions
496 Questions