2008 Jeep Liberty "ignition" Questions

...keys by doing the following: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch lock cylinder key code. 2. Insert the first valid key into the ignition switch and ...

Jeep liberty 2002.....ignition key lock Problem : Jeep liberty 2002..... Ignition Key will not turn, Possible solution: Ignition lock replacement. Question: Are there any recalls regarding this ...

The ignition key will not start the vehicle. I have to use the remote starter then insert the key into the ignition to keep the vehicle running. When I turn the ignition off there is alow buzzing ...

Replaced the ignition switch. Just cant get keylock cylinder to seat.and.lock. Looks like plastic "pin" in key cylinder and plastic pin in housing. Ignition switch actuator pin? Check to see that the ...

Ignition goes off soon after Idling My Ignition is unable to hold in slow moving traffic. Whilst attempting to move off or slow down to a stop, the ignition just goes off and often very difficult to ...

...keys by doing the following: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch lock cylinder key code. 2. Insert the first valid key into the ignition switch ...

Key Alert Continues to Sound after key removed from Ignition after I remove key from ignition and open driver's side door, the key alert keep sounding and will not stop until the door is ...

Why can't I get the key in my jeep ignition to turn to lock and come out of the ignition? The ignition won't turn to the lock position or past it to the Acc position so I can't remove the key It may ...

My iginition key will not turn Having problem with the key not wanting to turn in the ignition. I have a 2002 liberty, 3.7L 85,000 miles. If i flip the key over, it may work. If I move the wheel ...

...keys by doing the following: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch lock cylinder key code. 2. Insert the first valid key into the ignition switch ...