2008 Chrysler Town & Country "remove door locking switch" Questions

remove or "turn off" child lock on rear doors? Show me how to take the safety child lock off switch also I need a picture of this location on the door Child lock switches may be overridden by pressing

...door handle. Remove the two 10 mm nuts securing the outside door handle to the door. Pull the door handle out of the door. Install the new door handle by holding it in place and installing ...

...remove the door lock solenoid ( and I thought I had every tool) that I had no choice but to put it all back together and tell the wife she needed to take it to the dealership to fix it. I forget how ...

...the rod is held in place by a plastic clip try with key fob[button] if hear a click when lock unlock and not unlocking then rod not moving lock will have to remove door panel to get to lock ...

...door locks, rear window defroster etc are all through the BCM. Might be worth it to remove battery cables, then remove connector to BCM & clean all the connections/contacts good & retry it ...

Also the switch on drivers door will not lock or unlock the other doors. Remove and reinsert the IDO fuse in the fuse box under the hood. Remove the IOD fuse and put it back in. It will reset its self

...will have to remove the door paneling to check these components. you can buy parts at Car Part . com online . Maybe they have them If not there are a hundred other sites.like Automotive warehouse. ...

Door chimes with key removed. Running lights also stay illuminated. 2006 Chrysler Town and Country. think the ignition lock contacts have collapsed ,need a new ignition switch on the back end of the ...

...Remove door switch panel and switch assembly. 5. Memory Seats/Mirrors? If so equipped use a small flat pry tool ( I use a upholstery tool) and remove the mirror/seat switch and disconnect. 6. Using ...

...door will not lock or unlock the other doors. I believe the doors have to be unlocked before the remote can open them. If they are not unlocking by remote, it seems a common solution is to remove the ...