2008 Chrysler Pt Cruiser "reset engine light" Questions

...reset the engine light by disconnecting the battery cable. When I put it back on the car wont start and gage needles are jumping As I know disconnecting battery cable cannot reset engine light.Engine ...

engine light came on. Shortly after, gas cap light. Replaced gas cap and reset. Today bith lights came on again. are you fueling car with key "on"? That will cause light to come on. Disconnect battery

...reset the computer by disconnecting your positive cable from the battery for 5mins.the check engine light should go off @ not come back on, unless you have another problem. hope this helps!! if so ...

check engine light comes on BRING TO GARAGE GET FAULT CODE/RESET ENGINE LIGHT

2005 chrysler pt non turbo p0031 p0037 changed asd relay still engine light on engine light on replaced sensors and relay Disconnect your battery and then reconnect it will reset It work for is

reset engine code, within 1 day engine light on again, cylinder 1 miss fire, Changed coil, reset engine light, within 1 day engine light on again, cylinder 1 miss fire,,,,,, changed PCV Valve within 1

engine light on a pt cruiser after repair You can remove the negative battery cable for 30 minutes. This may or may not reset the ECU. If not then you will need an OBD2 scan tool to reset the CE light

...engine light goes on for a few days and then resets itself Light goes on then after about 6 starts it goes off. this happens intermittently. light is steady, not flashing. Car runs fine. It's a 2008 ...

...reset the computer unplug batery cables conect the positive cable with the négative cable for 10 sec than reconect them to there proper position on the batery and your check engine light should ...

...battery to reset light engine check engine light comes back on when you turn on the key and will not start. turn key on light is steady short time and then flashes 10 times. Check the code