2008 Chrysler Pt Cruiser "reset check engine light" Questions

...reset the engine light by disconnecting the battery cable. When I put it back on the car wont start and gage needles are jumping As I know disconnecting battery cable cannot reset engine light.Engine ...

...check engine light came on. Shortly after, gas cap light. Replaced gas cap and reset. Today bith lights came on again. are you fueling car with key "on"? That will cause light to come on. Disconnect ...

...reset the codes, two weeks later same thing happened. Have appt to bring back in. When the check engine light is off, the car runs fine, there is no sputtering or shifting issues. Not sure what ...

check engin light an easy way to reset the computer unplug batery cables conect the positive cable with the négative cable for 10 sec than reconect them to there proper position on the batery and

check engine light comes on BRING TO GARAGE GET FAULT CODE/RESET ENGINE LIGHT

check engine light on a pt cruiser after repair You can remove the negative battery cable for 30 minutes. This may or may not reset the ECU. If not then you will need an OBD2 scan tool to reset the CE

check engine light goes on for a few days and then resets itself Light goes on then after about 6 starts it goes off. this happens intermittently. light is steady, not flashing. Car runs fine. It's a ...

check engine light came on today and now I am worried. Could this be a sign I need the oil changed? The car is running fine no noises leaks or other issues I also checked the gas cap and that didn&

...battery to reset light engine check engine light comes back on when you turn on the key and will not start. turn key on light is steady short time and then flashes 10 times. Check the code

...reset the computer by disconnecting your positive cable from the battery for 5mins.the check engine light should go off @ not come back on, unless you have another problem. hope this helps!! if so ...