2007 Chevrolet Uplander "fuel rail test port" Questions

Ad

Question about Chevrolet Uplander

1 Answer

fuel rail. If there is no pressure than check for power to the pump as close to the pump as you can and with the pump plugged in. Also check to make sure the fuel pump has good ground. The larger grey

Ad

the rail) that sits over and supplies fuel to the fuel injectors. You will need a special test gage to hook up to the test port valve. Below is a picture of a typical GM fuel supply rail and test port

Ad

fuel rail. Many cars do not have a test port and you would have to fashion a "tee" fitting somewhere in the line (normally near the filter works). great question. 1MZ-FE the V6 has a fuel rail and all

Question about Jeep Cars & Trucks

1 Answer

...fuel rail to test fuel pressure. Need advice on how to go about testing the pressure. My fuel pressure set has an adaptor that installs where the fuel filter is to test pressure,may be able to rent ...

Question about Chevrolet Uplander

1 Answer

...fuel rail. The fuel rail is on the top of the engine. The rail will have a port in it to hook a gauge to. Just hook the gauge in the fuel rail and start the car. The gauge will read the fuel

...fuel rail. There is a gauge too that you connect the fuel line to then connect to the fuel rail to test the pressure on those types of setups. It's a little harder to do when they don't add that test ...

Question about Chevrolet Uplander

1 Answer

...rail is a fuel pressure test port that looks like a tire fill valve. You need a special test gauge to tap in, you can buy one at most auto parts stores that works with most makes fuel pressure

...fuel rail like a 2004. cleaned throttle body,fuel filter,air filter,spark plugs, fuel filter and plug wires a week ago-ran fine now same problem=no codes feels like not getting fuel always starts but ...

hi,im looking fo the fuel preasure port on a 2006 cadillac srx 3'6 There is a fuel test port on the fuel rail - you just need the standard gm adapter to fit onto the fuel pressure test port.

...fuel rail test port. Connect the 0-414 kPa (0-60 psi) fuel pressure gauge (from gauge set 5069) to test port pressure fitting on fuel rail (Fig. 7). The DRB III Scan Tool along with the PEP module, ...

Not finding what you are looking for?
2007 Chevrolet Uplander Logo

455 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...