2007 Chrysler Sebring Sedan "changed bulb headlight high beams" Questions

Ad

Question about Chrysler Sebring

2 Answers

that way. Shame on Chrysler for making it so difficult, in my opinion. But I hope this helps you to change the bulb =) YOU HAVE TO REMOVE HEADLIGHT HOUSING TO REPLACE HIGH BEAM OR LOW BEAM LIGHT BULBS

Ad

bulb and headlight (low beams driver side) still will not work. Changed the fuse and then bought brand new headlight assembly, installed and still low beam will not work. What else could be wrong? The

Ad

...Change the bulb , bulbs have a low beam and a high filament , when changing headlight bulb do not touch globe, and Dan you serious ? The headlight works on low beam but not high beam think about ...

...headlight is off. Try this to eliminate new bulbs for both sides: With a partner behind the wheel: PULL out the bulbs one at a time. Keep them plugged in. While you are holding the bulb - have your ...

Question about Chrysler Sebring

1 Answer

...headlight have a bulb for high beam and a seperate bulb for low beam? How do I change it? The headlight on an 03 baja are a double element bulb for high an low beam. I replaced mine with 9007 bulb ...

...headlight bulb and the low beam headlight bulb are replaced the same way. Open the hood. To change the high beam headlight bulb on the passenger?s side, remove the power steering fluid reservoir from ...

Question about Volkswagen Cars & Trucks

2 Answers

headlight failures are caused by a bad component like a fuse, relay, or module. Wiring problems can also cause both headlights to stop working. High beam headlights don't work or low beams don't work.

Question about Chrysler Sebring

2 Answers

high beams Both the low beam bulbs must be defective. People at Jiffylube change headlight bulbs while you wait, if you are not up to the task. Theres fuses and relays and wires under the battery that

...changed the light bulb, change the fuses, and change the relay switch. But it still won't come on. What is the problem? Both sides or just one? If both, The multi-function switch on the steering ...

changed the bulbs and it still doesn't work High beam switch moat likely, have you checked relays and fuses? It could be the Low Beam Head Light Relay. My 2011 Traverse only had the high beams

Not finding what you are looking for?
2007 Chrysler Sebring Sedan Logo

937 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...