Wiper Fluid Reversed Front and Back, Wipers did not When I try to spray the wiper fluid on the front window, the wipers move but no fluid comes out in front. Instead, it sprays in back. And when I try
...wiper fluid reservoir. If your in a bind, you can switch the plugs and small hose that go to them because they are both the same. The upper pump operates the back, and the lower pump operates the ...
...a jug located in the back..And if your fuse is good, and you have power to the moter, and the washer fluid pump....Then the washer fluid pump is bad...And you may need a Rear windshield wiper
Question about GMC Yukon
...fluid to the windshield. When the switch is released, the windshield wiper motor continues to activate the windshield wipers for 3 additional wipes and then turns the windshield wipers off. ...
Question about GMC Yukon
...wiper fluid. Apparently I've got a hose(s) hooked up wrong. Wiper fluid comes out correctly for the front but when I push the button for the back it sprays out the front as well. How do I figure out ...
Question about GMC Yukon
...wiper fluid will not dispense on front windsheld but will on the rear i have a 08 Wrangler Unlimited. The windsheild wipers work but the switch to dispense the wiper fluid and mist the wipers, does ...
...wiper fluid is low. My Mercedes 2005 ML350 Rear wiper fluid resevior is low causing the light on the dash to come on. I filled up the resevior in the front but it does not seem to fix the problem at ...
wiper fluid than you are for the front. You activate the front window fluid by pulling the lever toward you, while you activate the rear window fluid by twisting the end of the lever all the way up or
...wiper fluid and doesn't move the rear blade; i push it back and the front spits out fluid and blades move. I am lost. Could the motor be burnt out? If the motor comes on automatically when the car ...
Question about GMC Yukon
...fluid motor pumps fine and the rear wiper also works. Front wipers only. Tap on wiper motor while it is turned on and see if it moves . Also check the connection at the motor for loose connection and ...
125 questions posted
Usually answered in minutes!
593 Questions
524 Questions
309 Questions
326 Questions
238 Questions