2007 Hyundai Santa Fe Limited "remove door panel" Questions

...remove door panel from hyundai santa fe A door panel removal tool works best, but if you have a stiff putty knife about 4" long and 1 1/4" wide it will work if you are careful. Start at the bottom of ...

Remove the screws on the edges of the door panel, should be 2 on the rear with plastic covers on them (use the pick to remove the covers, but keep track of them for later when you put it back together

door panel remove how do i remove the front door panels on a 2002 hyundai santa fe it does have power wondows http://en.allexperts.com/q/Auto-Glass-3622/2009/1/2002-hyundai-santa-fe.htm

remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them.

...pop out with small screw driver Your door switch has gone bad. If it were a broken wire in the door, neither switch would work the window. REMOVE THE SWITCH AND CHECK THE CONNECTION BEFORE

...remove the door panel careful not to tear the sound deadener sheeting. You have to first remove the screws and pry the retaining clips with a special trim panel removal tool U can purchase from auto ...

remove the door panel and easily replace the door handle. Either take off the inside door panel, and trip trip the latch catch. Find a schematic of the inside of door pnl. then fish a coat hanger down

door, remove the door panel to check if any wiring has broken or dislodged. To check the door lock unit, I found it easier to remove it and check with a unit from one the doors that you know does work

...remove the inside door panel with the window up. Pull the plastic covering and look in the door for a clip or a nut that holds the rod in place. Reconnect the rod and replace the retainer, test the ...