2007 Hyundai Santa Fe Limited "reasons headlight bulb blow" Questions

Hi beams and running lights OK. Headlight low beams blow simultaneously sometimes. Actually quite often, for some reason. Check for voltage with a 12v test light or a voltmeter at the light bulb plug

...bulb.if headlight bulb is  blowed wear clean pair of gloves because headlight bulbs are halogen if you touch bulb with fingers,oils from you fingers will cause halogen bulbs overheat and ...

...blow for no reason. Is your alternator over charging. Takes alot to have a bulb go bad. Do you have a hard suspension. If it's low or slammed and you hitting some hard potholes when they are hot. May ...

...headlight behind a little chrome cover that was out, could that have caused the other headlights to go out also? I'm wondering if that other light behind chrome cover if replaced will make other ...

...headlight bulbs and passenger side light still does not work on 2007 tundra Check the fuses. I do believe there is a left and right side fuse for the headlamps. For some reason toyotas, especially ...

...glass part of the bulb with your bare hands. The oil from your hands will ruin the bulb for some reason. Check to see if your lens assembly is letting water in this will blow the bulb instantly

headlight bulb gets to hot or has had a bad connection and it melts the inside of this connector. This could be the reason for it not working properly. Also remember that when replaceing these halogen

headlight - 2002 altima the clip that holds the bulb in place (drivers side) seems to be broken. Since the process with headlights on this car is a serious pain, was thinking of just sodar the clip in

...HEADLIGHT BULB HOW DO I REPLACE IT If you have two head lights then you replace the one that is blowout. if you only have one head light then it will be a duel element bulb and you will need to ...

...headlight blubs in the past two years. the last one lasted two weeks. Any info or help. Thank you Put some waterproof electrical grease (you can get at auto zone) on end of bulb before you put in in! ...