...range indicates that the EEPROM (Electrically Erasable Programmable Read-Only Memory) on the control board is bad. This can be caused by a power surge or glitch through the electrical lines. You can ...
EEPROM 1. Disconnect power for at least 30 seconds. 2. Re-apply power and observe for at least one minute. 3. If code re-appears, replace control board (also called ERC or clock). Note: Applies to all
...EEPROM checksum failure within the electronic oven control. Disconnect power to the range for longer than 30 seconds. Re-apply power and observe the display for longer than a minute. If the failure ...
fridgidaire FGF 374 CCSA oven and broiler do not come on Natural gas stove. it beeps and displays F1 does not come on in bake mode or broiler mode F1 means it is a defective eeprom. The software is ...
...range with a constant F1-E1 error. pulled power and will not reset. model is a 665 series F1-E1 - EEPROM Checksum Error - Disconnect power for at least 30 seconds and then reconnect. Allow at least a ...
...range Power went out. Display says E1 F1. I can reset it but it only lasts for 15 seconds then returns to E1 F1. F1-E1 - EEPROM Checksum Error - Disconnect power for at least 30 seconds and then ...
oven won't light and the display is flashing E1 F1 HI. This is essentially a board code(EEPROM check-sum error). Use this check procedure to confirm failure. 1. Safely disconnect the power from the ...
EEPROM checksum error 1. Disconnect power for at least 30 seconds. 2. Re-apply power and observe for at least one minute. 3. If code re-appears, replace control board (also called ERC or clock). Note:
Question about Ovens
...EEPROM (the memory part of the brains of the oven) check sum. The only solution is to replace the control board (clock) if disconnecting the power doesn't work. Without the model number of your oven, ...
1,337 questions posted
Usually answered in minutes!
123 Questions
119 Questions
44 Questions
