Question about Maytag Ovens
working, no heat no broil. I swapped the element with the lower oven to test, and the element worked fine, but the lower element wouldn't Maytag cwe5800ace double oven. Six years old. Top oven stopped
...working The element in the lower oven of our fx4942u1/1 has stopped working. House mains tripped off as the oven was heating up for dinner, reset mains, element not working any more (rest of oven ...
...just once & then stops working. Replace the element - not usually any fuse in circuit with this. Often held in by 2 screws adjacent to the element at back of oven and conections via Fast-ons- ...
...element does not work. usually the surface element switch sends a voltage to the surface element coil. But if it has a defect ,it will not send the voltage and as a result the oven will stop
...element stop working; disconnected element and checked resistance - exactly 20om, connected tester to wires (heating element disconnected), turn ON oven - voltage is 96V? Have 10 year old fridgidare ...
...working. I have never used the boiler element? Is there some kind of switch that controls the elements? If I understand your use correctly, you were using the oven to heat the space? Or for baking? ...
It sounds like an electronic clock/timer problem. The clock must be in the manual mode for the oven to work. It sounds like it might be in auto. mode for both elements to stop working at the same time
...working. the grill and hob are fine though. does this mean i need a new element and can i fit it myself, or need a new cooker? It is most likely the element needs replacing although it could be the ...
element. Why would it suddenly stop working? Yes ,I would say that without doubt the element has gone Elements can go without any warning at all. need new element that is element code "AB20" from link
1,337 questions posted
Usually answered in minutes!
123 Questions
119 Questions
44 Questions