Microsoft Xbox 360 Elite Console - Black "reflow hana" Questions

HANA Chip or 360 gpu processor You will need to reflow these chips to get your system alive again Check out for xbox 360 reflow techniques on google...and search on youtube too...any doubt ask me good

...HANA" chip connected directly to the AV cable) in rare cases it is the GPU. 1) (Ideally) Send it back to microsoft 2) Get your board reflowed. 3) Try one of the X-clamp mods (following a motherboard ...

hana chip The sure fire way fix this is to have good repair shop reflow the G.P.U. and properly re-clamp it back to the P.C. board. cost very between 60.00-80.00 with at least an 90 day warranty .Also

HANA" chip connected directly to the AV cable) in rare cases it is the GPU. if the unit was purchased less than three years ago you can still get it covered under warranty as addressed on microsoft by

...HANA / ANA chip set. You can do what's called a x clamp mod with screws and washers and then force the G.P.U. to over heat. This is a quick fix , But It probably wont last long 1-3 mouths on average. ...

change the thermal compound and its still having issues the HANA/ANA chip or the GPU may need to be reflowed.  You can find a good tutorial on everything on www.llamma.com The only tools you need

reflow of the chips, the GPU, the HANA and the Southbridge Esp. Now depending on how confident you are in this, look for more info on how to reflow your xbox360 The best place to look for more answers

...hana chip or gpu is starting to come away from the board it will probley red ring soon which if it is under 3 years old microsoft will fix for free if not u need xclamp fix or in worst case a reflow ...

...then there is a 90% chance it's a scaler chip problem (the "ANA" or "HANA" chip connected directly to the AV cable) in rare cases it is the GPU. A proper Reflow and maybe X-clamp fix with repair ...

...hana/ana chip set. this can be a stubborn problem because the disconnects are on the corners of G.P.U. . R.R.o.D. is coming soon . Recomendations You need a solid reflow of the G.P.U. and a hardware ...