Whirlpool 30" Self-Cleaning Freestanding Electric Range - White-on-White "oven power went seconds" Questions

...oven/range Power went out. Display says E1 F1. I can reset it but it only lasts for 15 seconds then returns to E1 F1. F1-E1 - EEPROM Checksum Error - Disconnect power for at least 30 seconds and then ...

...the wall, power to the oven shut off at the main breaker and the back panel removed. the thermo fuse is just to the left and up from the center of the convection fan. It has 2 wires connected to

...So I went to the circuit breaker and shutoff power to the oven for about 30 seconds and turned back on. Everything normal now. I just assumed the slight flicker in the power affected to

...power outage we held the timmer off button for 5 seconds and the error code went away and the stove top works. But the oven won't heat up on our Kenmore Ultra Bake oven Check heating element for ...

...oven went off and the lower wouldn't work either. Control paned was blank, but interior lights were on and pushing control paned buttons resulted in beeps. Turned off breaker for 5 minutes to reset ...

...power went off and we started to re-enter My son went to change the time, (daylight saving!!!!). He started to re-enter the time and got side tracked half way through,when he went to continue the ...

...Power went out and when it came back on this code was displayed. can't use any buttons for oven. Flicked the breaker, clock came back on, when tried to set clock this code came back up Check this out ...

...oven on it goes into preheat for about a minute, then goes back to the error codes. Any ideas? Model # RBS245PDQ12 Control board failure due to a power surge. Replacment boards are around $180 and ...

...occured after a power outage. Clock error it happens when the external clock goes out of sync with the internal clock nothing to worry about it should have went away on its own after about 30 ...

...power had been off and the clock was flashing on the oven. When I went to set the clock, nothing on the touchpad works. I have tried opening the breaker for 10 seconds to see if it would reset ...