Canon PIXMA MX300 All-in-One Printer "fix paper feed" Questions

...fix the problem. Your paper feed source is wrong .Go to the printers control panel and change the feed source. If all you do is 8.5X11 you can go into the maintenance tab and choose it to ...

...feed paper my cannon pixma ip1600 has a paper feeding problem. it can't pass the paper through catridge to print. help please I suggest you get a sheet of Card Stock (Heavy paper) and place it in the ...

...feed paper, when it tries to My PIXMA IP 4200 printer will not feed paper, when it tries to print there is an awful clattering sound, can this be fixed? it looks as if there is a large part of the ...

to fix . it feeds paper in two ways it has a cassette that you can load. it is a drawer in the bottom of the printer and it also has a paper feed from the top. do you have it set for the top or bottom

...paper feed not working properly when it pulls paper in to start printing is always pulling in right edge first causing paper to go through printer at angle and get eaten rather than printed on. There ...

... Make sure that b appears on the LED, then press the Black or Color button.The machine starts cleaning. The cleaning will be completed after the paper is ejected.This should fix the ...

...fix my problem. Fixed my dryer the same way. hello, take a blower the one that is used for cameras , blow out all through the paper or cartridge inlet for few minutes, this will dust that may be on ...

...fix paper alignment cannon pixma MG2260 There is not enough information to really answer the question. However, if the paper is not "feeding" check for jams of other paper inside the printer. The ...

...paper feed issue paper from the top feed tray pulls in a little then kicks back out and gives a paper feed jam error message and won't clear untill printer has been turned off and let sit for a few ...

...fix Canon Pixma MP470 printer that does not feed paper properly to print from Windows PC The Canon Pixma MP470 does not grip paper to feed from roller as one inserts , how do I fix this problem? Open ...