the lamp indicator turns on When power cord is plugged in you here faint sounds of clicking checked micro switck when cover is off bulb no power when on clicking... Power supply???? the lamp indicator
sanyo plc-sw30 i have a problem when i power on the projector , there is no power lamp on a very slow light is visible and the projector shut down and the fan are in very high power The uProcessor ...
lamp replacement After replacing with a new lamp, the projector lamp warning light flashes and there is no projection to enable me to go into menu and re set. Is there a reset button on the projector ...
Question about Christie Office Equipment & Supplies
Christie error message "Lamp Interlock Fault" I changed the Christie (x9) lamp and when I turned on the projector, the LCD screen is showing the following error "Lamp Interlock Fault". I tried many ...
Question about Philips Office Equipment & Supplies
...full brightness, and many models even activate an LCD shutter to black out the image until the lamp has reached reasonable brightness. If you mean it takes several minutes to produce any picture ...
PT-L785U Projector I have a Panasonic PT-L785U projector that the lamp light started to flash we purchased another lamp but that lamp will not come on and the lamp it self does not come on. if the ...
Question about Acer Office Equipment & Supplies
...again, we lost power in the entire building. Is this a question only of purchasing a replacement lamp? sounds like it, unplug the projector remove the lamp put the covers back afterwards and plug ...
How do you tell the bulb is bad hi, Testing suspect/broken lamps 1. As before, with lamp replacement, allow approximately 45-60 minutes cooling time before accessing the projector. 2. If there is no ...
Question about Sharp Office Equipment & Supplies
...fiine until we turned it off and turned it back on Please help! The fault seems related to the lamp but it will be good to revisit the replacement of the lamp, check the lens cover section , the ...
dell 1800 mp Why does the power and lamp led's flash Hi, This may be telling you that the lamp needs replacing. Have a look at the specifications of your projector and note the operating hours of the ...
53 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions