Sharp XR-10SL DLP Projector "resetting lamp hours" Questions

...lamp hours. It is surprisingly easy.Hold UP on the projector until the lamp hours appear. Then press left or right to reset. This took me a while to find! But it's in the service manual. problem ...

...resetting the lamp hour do the following. While simultaneously holding down the Right arrow ( >) button and Auto sync button on the projector press Power ON button and Left arrow ( < ) button . ...

hours your lamp has been used. When the total hours used approaches 2000, the projector displays a warning. Even if you replace the lamp, the warning will appear on the screen until you reset the lamp

lamp hour of your projector. For resetting the projector do the following. While simultaneously holding down MENU/HELP, ENTER and Down arrow button on the projector, Press STANDBY/ON on the projector.

...lamp hours is stored in an EEPROM chip built into the lamp. As soon as you put in a new lamp (MT60LP or MT60LPS), the hours will be reset. If you remove and put back in an old lamp, the unit will see ...

how to reset the lamp hours proyector in124st? To reset the lamp hour timer, navigate to the Advanced Menu / Status / Service menu and select Reset Lamp Hours..

how to reset lamp hours lt265 nec Select the Menu [Reset] â?? [Clear Lamp Hour Meter] to clear the Remaining Lamp Time and the Lamp Hour Meter

...lamp hours (hold down left " VOLUME - " button, followed by pressing menu button for 5 - 10 seconds). However, neither of the good lamps work in the first projector. A while after turning power on, ...

lamp hours on Sim 2 Domino 18 Hello Please can anyone tell me how to reset lamp hours on this data projector, have replaced lamp. Thanks in advance. I am not familiar with your brand in particular but

...lamp hours reset Hello, unfortunately the NEC MT1060 - MT1070 series projectors have EEPROM chips built into the lamp housing which counts the hours that the lamp has been used for so the only way to ...