Question about NEC Office Equipment & Supplies
...to reset the lamp time clock to zero. NOTE: If resetting the lamp clock back to zero after 2100 hours of service, press the "Power Off" (not "Power On") button on the remote control for ten ...
Question about NEC Office Equipment & Supplies
reset the lamp so that the projector works again. Whe the lamp exceeds 2100 hours (up to 3100 hours in ECO mode) of service, the projector cannot turn onand the menu is not displayed. If this happens,
Question about Optoma Office Equipment & Supplies
...Lamp Reset" 6) Select Yes Certain models require you to hold "Lamp Reset" for a particular amount of time. It could be instantly, 3 seconds, 5 seconds, 10 seconds... Just have to play until it ...
...clean the filter as well.. Most projectors have a lamp life clock that tracks bulb usage. Here is a snippet from the user's manual that will walk you through process of resetting the Lamp hour
Question about Sharp Office Equipment & Supplies
...but the standby and lamp indicator are red, no button is working. how can i reset? Check if you need to reset the lamp life time counter clock after changing the lamp. Check the manual for
Question about ViewSonic Office Equipment & Supplies
...to the option menu 3) Choose "Lamp Time" 4) Hold the "reset" button for at least 3 seconds on the remote, or the > arrow on the projector. 5) Confirm the dialogue that pops up... That should be
reset the lamp hour after replacing the lamp. If not do the following for the same and try again. Also check is the lamp inserted is correct or not. Also check the lamp cover is properly closed or not
...reset lamp timer as will not project. Replaced the lamp in my 3m X50, bulb came right on. I had to shut it down before reseting the lamp timer. Now will not light up so that I can navigate the menu ...
Question about Office Equipment & Supplies
...is not displayed. If this happens, press the HELP button on the remote control for 10 seconds to reset the lamp clock back to zero. When the lamp time is reset to zero, the LAMP indicator goes
...reset lamp clock. Followed instructions in manual and it still wont reset. The projector sounds like it is trying to "boot" up but it just shuts down after about 30 secs giving me the blinking red ...
10 questions posted
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
354 Questions