Sharp XR-11XC DLP Projector "replaced lamp strike" Questions

...Replaced lamp. Visually inspected power supply board. Checked all connections. Check for shorted flat pack diode in power supply. i have an lp600 it powers on for 5 of the 7 seconds then stops at 2 ...

Lamp won't strike Replaced Proxima C160 lamp but get "lamp won't strike" message the ballast might be bad as well.

...lamp didnt strike keep trying it will not fire up help me if mains is ok and fan running ok, could be a bulb service issue, all lcd projectors have an internal lamp life counter which counts down and ...

strike the lamp. either the lamp is dead or the ballast has dried-up caps. a colorwheel malfunction will also cause the lamp to not strike, but you would get a red led, not a green. if the lamp center

...replaced. Hello, This means that the lamp didn't strike after five (5) attempts. Unfortunately this can be caused by several different problems. Here are a few in order of most likely on down. 1) The ...

...replaced the lamp but it still will not strike. Any ideas? If you replace the lamp but do not reset the lamp hours then the projector will not ignite the lamp to stop it blowing up the lamp and ...

How to tell if lamp is dead? Lamp strikes 5, Red LED flashes once over and over. All whirs and whines as normal. Removed bulb housing, one side half-caked with dust, vacuumed it. Removed bulb, looks ...

my EPSON EX70 flashes green when turned on then my EPSON EX70 flashes green after being turned on, then it displays solid red under lamp. I have no light nor image. the lamp may not be striking. check

...property. Is the lamp old? Does it need to be replaced? if not then it may be a logic board and now requires service from a trained repair technician that has access to the parts it may

lamp didnt strike i have replace the lamp infocus 540 still will not fire up what is wrong Hi there You should reset the lamp timer as this LCD Projector's counter counts down the hours and will not ...