Sharp XR-11XC DLP Projector "fan spinning" Questions

fan not spinning on start up? Every time I turn on my projector, I have to open the top cover and manually spin the fan carefully without touching the motherboard/sisterboard. Once it starts rotating,

...spinning too. If the foot of your projector is broken a piece of the shaft could have become stuck between a fan blade and the fan housing or any plastics on the projector that have broken for that ...

...fan icon. At this moment all the fans keep spinning faster and faster until the projector snaps back in standby mode.. I've already verified that all the fans are spinning. I have event tried ...

Why would the fan not spin? 3 reasons- 1. something is preventing the blades from spinning. 2. Bad fan/ broken wires. 3. Bad main board.

fan is not spinning fast enough to provide proper cooling. Also if the color wheel bearings were so bad that they are "squealing" the color wheel would never be able to spin up to phase lock, which in

...being used, caused power light to blink red, now the projector doesn't turn on it could be the fan, colorwheel or high temp. remove the lamp and turn it on. do the fans spin? if not, replace the ...

InFocus LP130 - lamp doesn't turn on, front fan doesn't spin, LED doesn't turn on. When problem started, LED flickered green (instead of solid green) as if it had a loose connection. color wheel spins

...going to go on but then just as fast it turns off. in order for the lamp to strike and stay on, the fans and the colorwheel must be spinning and up to speed. if you remove the lamp and start it up, ...

no working fan . I m from Dublin , Rep. of Ireland Check the voltage to the fan. If there is voltage, but no spinning, then it's the fan. If there is no voltage, then it's the motherboard.

...spinning. if the fan spins, the noise may be from the colorwheel motor going bad. the fan can be purchased through an infocus authorized service center. check the website for the closest one. but the ...