Onkyo TX-SR705 Receiver "dvd set" Questions

...set sound decode priorty to PCM c. next scroll down to you see digital assign - press enter assign VID1 OPTICAL to DVD ( this allows the pcm output from the PS3 to play through the receiver), next ...

...steroa conections only from your DVD player then you just check your DSP settings set to movie... like theater, cinema dolby prologic...etc. that is where you will only get the center sound to

DVD player is not set up for PCM sound). the best quality audio will be to set up either digital or optical audio between the DVD and the receiver. Once you have connected the optical or digital audio

the dvd disk was on stop mode, (by pushing display buttom in remot.) in settings I activated sound and better picture by choosing componet. hope this help....resolution (set your dvd righ not your tv.

...DVD player? You may need to set the digital output format in the DVD player setup menu. If it is set for LPCM then you won't get sound. It has to be set for bitstream and yoou may need to tell the ...

...but no Voices... HELP. I dont know what model and dvd brand you have but would like to assist you. Go to dvd setup menu and check audio settings, make sure to set on stereo. Problem will be

I have a Harmon Kardon-AVR 320, DVD 25, PA 2000. I can't get any sound with when trying to watch a DVD. I've tried every setting on each system. The L and R speaker light blink on the DVD setting. The

...dvd player sound setting is set to BITSTREAM and not pcm. pcm is only 2 channel. Then check to see that the volume setting for the rear speakers in dvd is up, most sony receivers hold different ...

...set the Digital In Assignment to COAX1 for the DVD player. I have tried cycling through the various Input Mode settings none of which are allowing Video or Audio. I did the same with the Video Source ...

...dvd player audio menu setup is set correct for 5.1 outputs, not DTS or Dolby Digital bitstream, can be difficult but read the user manual under sound options if possible, second be sure the receiver ...