...inside and stopped almost at end. washer was finished wires were shorting each other out that go into plug - once took apart saw the sparks so just cut and shortened wires and reconnected them to ...
Question about Frigidaire Washing Machines
...inside back wall. I am guessing the screws being missing made metal rub against each other creating the sparks. So I replace one of the screws could not find the other one. Now it stopped the sound ...
...clothes, cleaned the lint catcher, shut the door, set the time and hit the start button. When I press the start button all you can hear is a small buzzing sound like the dryer wants to start but wont ...
Question about LG Washing Machines
Clothes dryers usually have "blades" on the "male" end and the wall receptacle (female end) "pinches" the blade between two other pieces. I have seen the "female" side cause the problem more often. At
CLOTHES! Use the longest hottest setting and when it's done clean the inside (underneath rubber tire thingie) and the undernath part of the door with a papertowel. And to always leave the door open. I
...dryer buzzer as it was wired inside the box. The wires can be unplugged without cutting any. So, if you are concerned about warranty issues, it can be untaped and replugged without any even knowing. ...
Question about Frigidaire Washing Machines
...out. Anyone else with this problem? Take one of the screws down to your local hardware and buy new ones and lock washers (with teeth on the inside so clothes won't catch on them). Good Luck ...
...clothes were not drying. I took the back off and found the fan belt was broken. So I replaced that and while the back was off I decided to clean up the dust build up on the fan, the inside of the ...
838 questions posted
Usually answered in minutes!
2,660 Questions
1,146 Questions
974 Questions
256 Questions
168 Questions