Toshiba REGZA 47HL167 TV "bolts mounting" Questions

...in the mounting bolt holes. The entire back and circuit board must be removed to install nuts or bolts and washers from inside the TV to attach a wall mount, unless the same stand bolt-holes are

what size bolt do i use to mount my regza toshiba to a wall mount, 47 in. Metric M5 or M6 from HD or LOWES for about 35 cents each. Get different length to try. ...

...the stand. Thanks the stand just slots into the bottom of the tv and you just tighten it with four bolts

...so we can wall mount... forget the four holes on the bottom of the stand. Remove the five allen bolts on the back bottom of the tv-not the stand. Yank on stand and metal plate slides out with ...

bolts. What size do I need? Assume you are mounting on the wall, if so a good mount will have the standard bolts in the package. If this is a used mount, you will need to determine the length based on

...bolts. If your TV mount has its mounting bolt holes too wide apart for bolting to a standard 2" wide stud, mount a 6X6" piece of 1/2 plywood through your wall to the stud, using at least 4 #10 deck ...

what size bolts hold the wall mount bracket to the tv The bolts that hold the wall mount bracket to the TV vary in size depending on the manufacturer of the tv you have. The best thing to do is to ...

...bolts. Next, removethe mounting arms or mounting plate from the wall mount packaging. To attach mounting arms, line up the arms vertically and parallel to each otherusing the mounting holes on the ...

...bolts for mounting bracket?? I bought an entertainment center with a arm and mount for this tv. I have to mount part of the bracket to the tv. I see the 3 holes with inserts in them on both sides of ...

bolt size what is the bolt size i need for back of the tv to mount it to the wall mount They are Metric screws, either M5 or M6, you can get them from hardware store for about 25 cents each, so get ...