...by disconnecting it from the outlet or switching off the circuit breaker of the home for 10-20 minutes then restore the power. If the reset doesn't work your range may have one of the above
...reset unit had a power failure that caused fuses to blow. replaced fuses to get stovetop burners working but the oven and clock buttons on the control panel will not respond to reset the pf code that ...
Reset power to the oven! Power the oven down by turning off the circuit breaker(s) or fuse(s) or if you can, unplug the oven for one (1) minute. Turn the power back on turning on the circuit breaker(s
Question about Frigidaire Kitchen Ranges
...power failure, but this time when I press any of the buttons on the control panel, nothing happens. The manual says to press the clock button for 10 sec, then it will beep and reset, but nothing ...
...this feature? Shut the power off at the breaker, wait 10 minutes, then reset the breaker. Sometimes the units need to be reset, as power failures will make the computers in them react
suddenly flashes zero and oven stops. Clock never resets but after about 5 minutes you can go through the whole process again. Shut off power at the mains breakers and restart. This may reset the unit
...power came back on everything seemed ok. Then today I started having trouble with the stovetop. It will work fine for a few seconds then I get an 8.8 PF then Er and it shuts down. I tried turning the ...
...reset it after a power failure and it still wont work. I also checked the back for loose connections and found none. I tried holding down the clock button to try to reset it with no success. Any ...
...on. The range is a Whirlpool Model RS6755XB These electronic controls are very sensitive to power surges. I am afraid your control is now bad and must be replaced. There are no fuses or reset
510 questions posted
Usually answered in minutes!
213 Questions
158 Questions
123 Questions
110 Questions
92 Questions