Braun Tassimo TA1200 Espresso Machine "floating water float" Questions

Water tank float does not not float even after washing Have scrubbed the insides of the tank, the float slide/pipe, and the float, itself, but the float just doesn't float and the machine will not ...

...water will fill and stop it from floating. Also, if the cap that holds the magnetic float into its chamber comes off and the float is released then it won't be there to trigger the water level sensor ...

float when water is full. Here it is exactly how...>>...fill the tank slowly (as it is still unattached to the machine) ensuring that the float does float and then slowly put/attach the tank back with

...float block in the water tank, floats when the tank is full of water and tank removed from the machine, when you install the tank back on the machine, the float sinks to the bottom of the tank. The ...

...water enter in the float and this make it to stay on the bottom of the tank. You can visually inspect it and if possible you can dry out the water and weld with a super glue the hole if possible, if ...

...water tank error and faulty magnet that did not float up. We fixed it by removing the rubber top and then removing the "floating" magnet. It was waterlogged and we pried open the top, took the ...

...water enter in the float and this make it to stay on the bottom of the tank. You can visually inspect it and if possible you can dry out the water and weld with a super glue the hole if possible, if ...

float in the back corner of the water tank, which contains something magnetic that must trigger a sensor. I put a piece of plastic in the float chamber to push the float closer to the side of the tank

...floating. If not, clean your water tank & ensure the float floats freely as water is added. 2nd, check the switch. Remove the water tank & use a refrigerator magnet to test with. Move the ...