Krups KM7000 "security screws coffee maker" Questions

Ad

Question about Krups Coffee Makers & Espresso Machines

2 Answers

...coffee makers No. 198. The handle came loose on the carage. Easy fix. Pry off the cover on the handle to expose two philips screws. Secure the screws back in and pop the cover back on. There are two ...

Ad

Question about Keurig Coffee Makers & Espresso Machines

1 Answer

...coffee maker, and unplug the power cord. Allow the unit to cool for 30 minutes before emptying the water. This gives the water inside the hot water tank an opportunity to cool, helping to prevent ...

Ad

Question about Krups Coffee Makers & Espresso Machines

1 Answer

security screws what tool do i use to unscrew my coffee maker? can you tell me where i can buy one if an ordinary srewdriver doesn't work? Just had the same problem. You need to use a Torx T-9 Tamper ...

Question about Jura Capresso Coffee Makers & Espresso Machines

2 Answers

...a temperature control device, and replace it. You'll also need special Torx bits with the hole in the end ( security-type screws ) to take the coffeemaker apart. Pretty easy job. Mine works great ...

Question about Black & Decker Coffee Makers & Espresso Machines

2 Answers

...the power cord entry. Gently work the two halves of the unit until they separate. There is a single security screw in the back, and two tabs on the sides of the case release the two halves. I found ...

Question about Coffee Makers & Espresso Machines

1 Answer

...under the plate it will take some specialized tooling to replace might have security screws usually the fuse is crimped  on do not solder replace with same rating some available at radio ...

Question about Braun Coffee Makers & Espresso Machines

2 Answers

...screws? Thank you, Robert I used a pair of needle nose pliers to grip the outside of the head of the screw. I looked like mine. I see one that has a triangular hole in it. you might try a set of ...

There are two security screws on my Mr Coffee. What type of screwdriver will take them out.Have not been able to find a picture of the screws to determine what tool to use. TORX

Question about Miele Coffee Makers & Espresso Machines

1 Answer

...coffee beans). Remove fixing screws (normally philips) securing the bean container platform. Remove grinder's bean intake rubber seal. Unscrew the grinder's fine/course selector, paying close ...

Not finding what you are looking for?
Krups KM7000 Logo

37 questions posted

Ask a Question

Usually answered in minutes!

Top Krups Coffee Makers & Espresso Machines Experts

Pierre Laplante

Level 3 Expert

2042 Answers

Ray Murphy

Level 2 Expert

68 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Krups Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...