Krups KM7000 "krup thermal fuse" Questions

...thermal fuse - does anyone have specific experience with this model - i.e. parts are hard to find / expensive / toss it and go back to Goodwill ?? Thanks, Still Trying Thermal fuse gets stuck, gently ...

Where can I get a thermal fuse harness for a Krups mk7000 N a If it is no longer available why not read the temperature rating on your dead fuse and replace the fuse only?

...fuse?) or is it junk. Bought the machine in March 2008 Mine had the same problem ... all the lights are on, but no heating on the plate, and no dripping of water. After a weekend on the workbench, ...

...thermal fuse blew. Most recently, the light would come on, stay on, but nothing else would happen. This time it was the 192 degree C fuse. Please note that these parts never got close to their rated ...

...thermal fuse has blown and needs to be replaced , if unit gets too hot it will blow it is very small possibly in heat shrink tubing crimped on the AC cord inside, need a test meter to check for ...

...the Thermal (not Thermo) fuse is soldered in line with silver solder and unless you have the ability to cut the old one out and replace it, the cost would be greater than a replacement coffee

in the thermal breaker blows. It seems that there is some electrical fault causing uncontrolled power to go to the plate and cause it to heat until the fuse blows. I'd be suspecting a fault on the PCB

...thermal fuse hidden with in the in line cord inside the machine. check all with test meter on continuity selection for electrical flow. thermal fuse got too hot and save the machine ,but the element ...