...power OFF the printer before powering OFF the Controller, and power ON the printer before you power ON the Controller. Power OFF the printer. The power switch is located directly to the left of where ...
Question about Canon Office Equipment & Supplies
off by the power button on the unit? is the power button a rocker switch or a simple button? also are you powering it off by a power strip? Most electronic devices have a clock circuit that is powered
...select the auto power shut OFF setting.Use this setting to enable or disable auto power shut OFF,press 0 to OFF or 1 to ON.The program name is auto power shut off setting and the program number is
Question about Canon Office Equipment & Supplies
...power off. 2. hold stop/reset, hold ON/OFF 3. release stop/reset, push stop/reset twice, quickly, then release ON/OFF 4. wait untill LCD display shows â??Canon Idleâ?,then push stop/reset ...
Question about Canon Office Equipment & Supplies
...Power Off the Printer, Wait 45 Seconds, Then Power On the Printer Some problems can be resolved by powering the printer OFF and ON. WARNING: Only use the power switch on the printer to power the ...
off via the power button or power switch. Performing a power reset Press the On button to turn off the HP All-in-One. Unplug the power cord from the back of the HP All-in-One. Unplug the power adapter
Question about Xerox Office Equipment & Supplies
...Power OFF the Printer, Wait 45 Seconds, Then Power ON CAUTION: If the machine is powered OFF / powered ON, all information that is stored in the machine's memory may be erased. NOTE: Before ...
...power on/off switch to off and then on again. The power came on for approx. five (5)seconds and went off again. I have not been able to power the printer on since. Try it in another powerpoint. Try ...
Question about Canon Office Equipment & Supplies
power off recommendation, fault is still there on power-up. I searched internet forums and found out how to reset the internal processor, thereby deleting the error message and allowing the printer to
off, power light and panel display go off. But still working other parts In other words, it has a noise and getting hot inside of machine even though main power switch is turned off. It has same noise
472 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
