incorrect printhead I have a Canon MP830 with an error message The type of print head is incorrect Install the correct print head. I have verified and reverified that I have the correct print head. ...
...incorrect, replace the engine board. If correct, replace the printhead assembly. Error Code 934 Mirror Motor Lost Lock Error Code 935 Mirror Motor unable to reach operating speed = These error codes ...
Question about Canon Office Equipment & Supplies
...correct print head message reads... The type of print head is incorrect. install correct print head That happens when the printhead goes out, you'll need a new printhead,QY6-0075-000 around ...
...incorrect print head. Have not changed anything. Has anyone solved this problem? Any help is appreciated. Yes, that happens when the printhead goes bad. You need a new printhead, QY6-0061-000 around ...
...replace the engine board. The voltage at J3-7 measures approximately +24 V dc. If incorrect, replace the engine board. If voltage correct, replace the printhead assembly. (Laser Scanner) Good
...in ink tank section. Clean this sensors. Incorrect or dust colors - problems with printhead, or with the ink system. If you never replace printhead on this printer - call service. Thats be
Question about Canon Office Equipment & Supplies
...the incorrect cartridge and hope that the printhead has not been damaged by using the wrong cartridge. May need several printhead cleans to clear incorrect ink from the feed lines. Hope this
Question about Canon Office Equipment & Supplies
...printhead is incorrect install the correct printhead The part number is QY6-0061-000, it will cost you around $60.00, I believe www.precisionroller.com has those in stock, but sometimes amazon will ...
Question about Canon Office Equipment & Supplies
...incorrect. It is the print head that came in the box with the machine. I am using only Canon cartridges of the correct color and number for this machine. It's highly likely that the printhead is ...
incorrect detection of air. If there really is air in the manifold, however, this procedure will not solve the problem and the printer will have to be serviced. Step 1 - Remove all printheads CAUTION:
472 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions