Epson CX8400 All-In-One InkJet Printer "black band bottom page printing" Questions

...printer should start printing a series of letters, numbers, horizontal lines and a black solid bar at the bottom of the sheet. Once this test page is completed, turn the printer off to stop the

band of black appears on the back of the page, approx 1/4 inch in width. how do I stop this? The exit rollers need to be cleaned, but whats happening is ink is coming from the bottom onto the rollers.

...black if you get the white bands do the following: Clean the corona wires open the cover pull out the sliding charge wires and clean with q tio and acoho or a pencil erasure If that does not work ...

black band, with a small amount of white text, along the top of most all of the pages for our page headings. It?s a design we?ve been using for 4 of 5 years now, and with our old copier we didn?t have

...black bars on the bottom of the top cover. These are the LED's, which put the image on the drums. It also could be the imaging drum. They only do so many prints. If you didn't do many prints... it ...

...band' about two thirds of the way across any photograph I print, no matter what size. I have done all the maintenance checks, cleaning, deep cleaning, print head alignment, roller cleaning and tray ...

...bottom on the middle of the right side of the page. I replaced the toner I changed my black toner cartridge when it ran out in my laserjet 2600N for the first time. Right off the bat I got a ...

black band on). This is quite tight take a minute to see how it clips in so you know how to put it back. 6. You will probably see that the section of the rubber band that has been in use is white/grey

...printed will be on page two. On the 1st page, there will be a black bar on the bottom of the page. It should be a solid black bar with no lines - this is the test for bad elements on the print