Question about Canon PIXMA Office Equipment & Supplies
strip of glass now looks like a line to the copier. You said it also does it when you lay it down on the glass !!??(platen) that should of indicated the drum has a ring around it, but since it doesn't
...strip when you remove a paper jam. If you proceed to the next step, you may have to repeat this cleaning. 2) A paper jam Carefully pull any sheet from the rear tray or paper output slot. Detach the ...
Question about Canon PIXMA Office Equipment & Supplies
...black line. Any advice? Thanks! When using the ADF to scan multiple document the scanner assembly stay stationary and the paper is fed across it. Where the scanner parks for this there is something ...
Question about Canon PIXMA Office Equipment & Supplies
...black line on all copies Hello, It sounds like you have a spot on your image scanner. Open the top of the scanner as you would to place a sheet of paper on the flat surface. You should see a thin ...
Question about Canon PIXMA Office Equipment & Supplies
...black line from the top of the page to the bottom. Is there a way to make this line disappear? Cleaning the rollers and the trying to clean all the parts that feed the paper in. Hi if you scan ...
Question about Canon PIXMA Office Equipment & Supplies
Black to start the copying, I get error message: Document in ADF. Redo operation after checking document in ADF and pressing OK. I then recheck doc (it's fine) and press OK. Error message: Document in
strip. Solution 2: The purge cap (the white sliding mechanism that the print head parks to when it's not in use) may be not lubricated well enough . Lubricate the sliders with some white grease (don't
Question about Canon PIXMA Office Equipment & Supplies
...strip before the POWER lamp goes out, this capping will not be done properly, causing the Print Head to dry and clog. * When You are not Using the Machine for a Long Time. When you are not using the ...
Question about Canon PIXMA Office Equipment & Supplies
...black and white. Hello, The line issue is caused by something on the image sensor. To get to it and clean it just pull the front up where you put the paper into it to scan. Inside you will find a ...
Question about Canon PIXMA Office Equipment & Supplies
...covering part of it. Most copiers don't use the full size scanning plate for copies, but use a strip that scans the paper as it moves across it. If something blocks part of it, you get the black
2,559 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,594 Questions
1,302 Questions
1,216 Questions