Maytag Dishwasher "water not spray" Questions

spray water during the cycle. What to do next? Hi frustrated in Raleigh, I understand that the spray arms are not moving or spraying water, even after you have cleaned the screens and arms. What might

water spray failure? try removing spray spinner and clean out holes the spray heads get blocked and stop water flow, or you may be able to remove spray nozzles and clean out , i had this several times

Water is hot. top spray (attached to the top of the machine) does not rotate when in use. Spray under the upper rack rotates during use. Could there be water leakage between the vertical manifold that

...spray arm and rear water supply tube to upper spray arm. Remove torx screws that secure the sump cover. Remove the rounded cover on the left side to expose the chopper assembly. Inspect for breakage ...

...spray water When washing the arms arn't spraying water leaving the dishes dirty. Could be a a couple different issues.. Not filling with enough water or food chopper broke or food chopper filter ...

water is being pumped through, the spray arms are definitely not blocked but they're not spinning. The main water pump sounds to be defective, not supplying enough water pressure to turn the spraybars

...in position in the feed tube. Try adding more water in the tub to see if the upper spray arm starts rotating. Other possibilities; low water charge, cracked spray arm & poor wash pump

...water Both upper spray arms are not spraying water... I have taken a air hose and sprayed them out...also the tube which supplies them water. They are clear. What now? It sounds like you have a model ...

plugged filter in bottom, preventing water from draining down to the pump area. If the pump can't get water, it won't pump water up into spray bars. If spray bar holes are plugged, water can't get out