Onkyo TX-SR605 Receiver "video output hdmi amp" Questions

...can not down-convert HDMI input (coming from your HD DVD player) to Component video output. Sorry that I could not give you a solution as this is the 4306's limitation (written on the 4306

...output to the TV. HDMI handles both audio and video. Disconnect the digital cable and just use the HDMI for both audio and video. The optimal set up would be as follows: With a cable or sat box with ...

output from the DVD for both audio and video. Ensure you are getting video AT LEAST with a direct test to projector. Confirm your amp is monitoring the HDMI input coming from the DVD. Hope this helps.

...hdmi cable the blu-ray says 7.1dts hd and my system only outputs 5.1 dolby. I know you need 7.1 analoge out but is my system so obsolete. Is there no upgrade my amp has 10 channels built in Thanks no ...

...video output. If I do a direct hdmi connection from the pace cable box to the tv it works fine, but going through the receiver, the is no video to the TV. Any assistance to determine why I am not ...

...I have just completed this installation myself. You are correct, HDMI to Amp Input from Bluray and then HDMI from Amp output to TV. Coloured cables are not required to operate the bluray now. Good ...

output and had no problems but the dishnet reciever uses hdmi. Any suggestions? Wilmsc49 make sure the dish IRD is set to transmit video and audio through HDMI, also look for an autodetect function on

...device and when you connect another it send it ground you have to do this chech with a voltmeter in the hdmi splitter output is not dc present if so change it cause is not blocking dc current ...

you have,you need either 2 or 4 channel HDMI converter.Connect the HDMI output to your tv and connect other equipments to the various HDMI,VGA,component and composite inputs,including your Bose System

...video throught HDMI output So I recently set up my Onkyo TX-SR605 reveiver and have ran into a few issues that I can not seem to figure out. I have an HDMI output from my receiver into my TV. I have ...