...a kxtd824 with a tvs50 voicemail. When in day mode, the trunks flash, but do not ring on ext 101. DIL day is set to 101 and lines on 101 are set to immediate ring. DIL? It's a term not used in an ...
...Depending on how the private lines were programmed, you need to pull the ringing out of DIL 1:1 if it was assigned and put it into DIL 1:N. Look at programs 407-8 and 603-4. ...
Question about Panasonic Lands Phones
...supports Caller ID? Jack 01 Press prog *#1234 speaker Press 414 and change CO-1 from NORMAL to DIL and Enter Jack 01 for Reception or whatever Jack is connected your to preferred answer point Do ...
HOW TO REMOVE PASSWORD PANASONIC PHONE KX-TG2361JXB inter this code: 726276642 ashehri how do i unlock dil if i forget my password from kx-tg2361jxb s\n 5bbdb024596
remove dial lock only dil lock yes dial lock
...the receiver nor selecting the calling line. check if your ext. is assigned as a member of the DIL ICD group of that line (PBX
Question about Panasonic Lands Phones
...mail off? I can not find anything in the instruction booklet about direct to VM. You have to check DIL in the 400 series on the 1232/816. This may be done by TRUNK GROUP or Line number. So if it is ...
...to our extension numbers? if your pbx has a built in disa feature, then you need to program the DIL (sys. pgm. # 418) to DISA-OGM 1. Then you need to record an OGM (program 9,1,1) to tell you ...
Question about Panasonic Lands Phones
can't answer it. If it comes in and immediately gets answered I could be that the trunks are set to DIL to the voicemail like it would for night service
...mode? Do you mean have calls transferred to voice mail? Go into system programming and change 408 (DIL 1:1 Nite) to point to the ext of the voice mail port, which depends on your system. That number ...
769 questions posted
Usually answered in minutes!
1,197 Questions
619 Questions
465 Questions
293 Questions
275 Questions
