no dial tone connected vtech CS6229-3 but get no dial tone - waited till batteries were fully charged, still no dial tone - reconnected the old phone & now no dial tone there either (worked fine ...
...tone dialing . one phone line has been setup for Decadic dialing and the other line may be setup for tone dialing. If tone dialing is working on one line but not the other then get phone company to ...
...If you still cannot break the dial tone, then the problem is with the telephone line (phone company) Go into your phone menu & change the dialing from tone dial to pulse dial, it should work
...dialing tone. Thank You! Lisa Lisa, If the 900MHZ phone is Model 26928M programming for rotary dial usually goes like below, can't hurt to try on any model. TONE/PULSE DIALING This adjustment allows ...
dial tone on speaker-phone but no dial tone on line 1 Either button mapping or no dial tone at the system cabinet. If your desplay sas CO1 and you have no dial tone, go to the sytsem cabinet ans swap ...
...If there is a dial tone make sure the phone is set for tone dialing. There will either be a switch on the side of phone for pulse or tone, set for tone. or go into the menu and look for it
...TONE/PULSE DIALING This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing. The phone is pre-set for touch-tone use. To set to tone or pulse dialing: 1. Press and hold ...
tone dialing I can't figure out how to change my phone back to tone dialing. It changed to pulse on its own. Here's what the manual says: Changing the Dial Mode (Tone or Pulse Dialing) (HS1 only) Your
...model of your VTech 5.8GHz phone, I can only suggest that you enter it into the search box here to download a copy of the manual. The manual will describe how to switch between pulse and tone
167 questions posted
Usually answered in minutes!
1,197 Questions
619 Questions
465 Questions
463 Questions
293 Questions