...error 1. Disconnect power for at least 30 seconds. 2. Re-apply power and observe for at least one minute. 3. If code re-appears, replace control board (also called ERC or clock). Note: Applies to all ...
...Error code F7 plus beeping My Jenn Air Oven, Model WM27260B, shows Error code F7 plus beeping. the cancel/off button does not work. I disconnected power multiple times in excess of 20 Mins no help. ...
error code -fc- beeping will not stop? From JENN AIR FAULT CODES... FC - Communication error between boards - Wiring harness or power relay board (PRB) Hope helps.
...error code because the ribbon cable on the touchpad hasa loose connection at the clock. check that the connection is tight. The error code can be cleared by pushing the clear/off button,if it returns ...
...aire JMV9169BAP error codes? Try these: http://www.appliancepartspros.com/repair-help/jennair-fault-codes.html ...
Error Code 4D21 Both upper and lower fans turn just fine. I "did" repair the de-soldered connections on the speed sensors but I still get an error code 4D21. Any suggestions? Somewhere the control is ...
...error code is for sensors and the other is indicating a short in the wiring harness. We checked the wiring harness for open circuits and found none. Any help would be appreciated. there is a big ...
Question about Jenn-Air Ovens
...the FR error code mean on a jenn-air model W30400P wall oven during the self cleaning cycle? FR Second oven error sensed The unit never detected a sufficient rise in temperature in the second
error code F1 oven turns off and error code comes on Fi error code beeps and there is no problem. I had the same problem and found this post: ...
339 questions posted
Usually answered in minutes!
130 Questions
51 Questions
35 Questions