Sirius Satellite Radio Receiver "set channels" Questions

FM channel set at 88.5, too noisy, need to change the channel to a quieter channel Use the FM extender kit to improve the signal. You can change the channel by holding down the cassette icon to enter ...

...didn't try this: Make sure that the radio is in the dock and has a signal. From there, go to the settings - device settings. Select "Reset Channels". This will more than likely fix the issue. Good ...

...make sure that you have a very good signal - check channel 1 audio. Then go to the MENU and 'RESET' to factory settings. Then call SiriusXM and have them send a 'REFRESH' signal - leave it on ...

will not play all channels I can only get a few channels on my Tao. I don't know how to set to get all channels.It used to work. It was just a simple refresh via the internet. thanks

...channels. I have had the signal refreshed twice by xm but they will not reload. I have also set to factory resets and checked channel resets + and - . Called Delphi who told me it was out of warranty ...

starview digital receiver hi i wrongly pressed the factory setting button and then ok to delete now majority of the channels are not shown. the message comes scrambled or bad channed i can not watch ...

...on my sagem dbox lovely linda x Hi. Unfortunately the box does not keep a backup of your channel settings and codes. When this happens you need to program channels again. You will be asked to ...

...channels, just scroll.'tried re-set, goes back to favorites, any suggestions ? my sfyfi3 is stuck on favorites, will not let me punch in channels, just scroll.'tried re-set, goes back to ...

Just check at the very ends of the FM band for channels first and try to set it 2 channels away from an active channel, so if you have a station on 106.5, you want to be on 106.9 or higher, etc.. Okay

... Yes, you need to go to your menu and select an FM channel (that isn't being used in your area) and set that in the radio. Turn your radio off using the power switch, wait, then turn it back on and ...