...you specifically on what to do and what needs to be replaced (also you may need to consult the device's warranty status) 1-877-BROTHER Brother Tech Support hope this helps, good luck on this
...status of the printer.Off means one of the following:The printer is turned off or is powering up.The printer is not connected to a wireless network and in power saver mode. In power saver mode, the ...
Question about Dell Office Equipment & Supplies
...status of the printer by using the printer tools. To gain access to the tools, open the Printer Properties dialog box, click the Services tab, and then click the Service this device button. Use the ...
...status back to the computer. SO, depending on what "recognize" means, the printer driver may be corrupt, or the wrong one. The printer connection might be bad, or the printer interface may be bad. ...
...status of the WiFi light on the printer (green = connected to a network, orange = not connected to a network). Try to turn off/on your printer. Doing this usually fixes minor communication issues. ...
...device manager printer scan for hardware changes or check with your administrator... --------------------------------- disconnect yer printer from the computer and turn it OFF (check again for ...
...you right-click My Computer> Select Hardware> Device Manager> Click on the + next to Ports (COM & LPT) and then right-click the devices there and select properties, what do you see in the status
...device. You may try shutting down your computer, after you save any unsaved work that you were doing, and close applications, and can properly completely shut off the computer by selecting Shut down, ...
...status monitor and before you print check if your sending the print job to the right Tray it need to be set to cassette in the property. btw depending on the software your using it my not accept the ...
282 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions