...probe and bake are flashing with a sound and baking will run for for 5 mins then it will stop. I had the same problem and pulled off the contorl panel and removed the ribbion looking thing. You might ...
...flashing the word probe and beeping every time I set a baking temperature. There seems to be no issue with the oven other than the beeping is annoying. I tried replacing the temperature sensor but ...
probe light off after completion. So, press BAKE, set it at 300, press START. Now it will ask for a PROBE temp., set it at 200 and press START. Let the oven heat up and wait for it to finish. BTW, the
...is disengaged is triggered and then the oven flashes between probe and bake and it will not turn the burners on. Lower oven works just fine what is the make and model number of your oven?Thanks ...
...flashing again F3 is Open oven temperature sensor circuit, to fix this you need to read oven temperature sensor circuit at oven temperature sensor ( approx 1000 ohms at room temp); check for cut or ...
...flashing that code. It does the same thing for both ovens. I can't find the PF32 in any documentation. Any ideas? Hello – This manufacturer does not show to have such an error code for a wall ...
My Frigidaire FGF354BGWC flashes F1 and beeps It started doing this in the middle of baking. Now it does it even when the oven is not in use. The only way to stop it is to unplug the unit. We had a ...
...flashing again after about 10 minutes. The oven is about 10 years old now, and we use it about 2 times a week. Any help would be greatly appreciated. jaz3133, it's probably the temp sensor that has ...
bake range over tempature error. First try disconnecting the power to the range for more than 10 minutes and see if the error re-appears. If it does then you will need to test the tempature probe with
25 questions posted
Usually answered in minutes!
924 Questions
123 Questions
119 Questions
44 Questions
