Frigidaire FGB24L2A Gas Single Oven "draw wont open" Questions

wont heat up? acf3375ac model The problem is usually the igniter not reaching the correct amp draw .When the igniter does not reach the correct amp draw it may allow the gas valve to partially open or

...wont. The broiler does not heat up at all. The problem is usually the igniter not reaching the correct amp draw .When the igniter does not reach the correct amp draw it may allow the gas valve to ...

...wont lite Replace the igniter anyway. As they age, they tend to get "weak", drawing less amperage, and thus not allowing the gas safety valve to open. This is even more noticable if you have lower ...

wont heat up enough to cook food The problem is usually the igniter not reaching the correct amp draw .When the igniter does not reach the correct amp draw it may allow the gas valve to partially open

...wont open 2) even though the bake ignitor is indeed coming on it isn't drawing the proper amp draw (3.2-3.6 amps) to open the gas valve ,the very fact the ignitor comes on totally eminates that ...

wont heat up and the glow plugs are working and the gas is on Most often the problem is the ignitor is not drawing enough amps to open the safety valve. Without knowing your model # , your valve could

...is amprage draw on ignitor it should be between 3.2-3.6 (as label on gas valve states) with a new ignitor and again continuty on gas valve its the gas valve its stuck and wont open. Good luck, ...

...they are glowing bright orange,but if they get weak they wont let enough current through to open the gas valve fully as both are in series with each other and rely on current draw to open the gas ...

...wont allow gas valve to open fully. I know you going to doubt that what i'm telling you is correct, i base my diagnosis on my 30 years experience as a appliance repair technician.Replace ignitor ...

...wont work gas kenmore with electric controls you can set temp it goes to preheat and nothing happens broiler works and all the tops work Hello, here is a tip i wrote covering that What the problem is ...