control board? The control board. As long as none of the buttons appear to be stuck. Press each button one at a time feeling for the retraction or click. If this checks good replace the control board.
...control board has detected a defect within the control board itself, the F0 code can be cleared by pushing the CANCEL/OFF button and if it goes away and returns all is well,however if a short time ...
...comes on Hi F1 Error indicates a bad control board and the control board (electronic control) should be replaced to solve this issue. Hope this helps...please post back for further assistance. ...
...control board (often the microwave control board). Yes you have a microwave control board in a double wall oven. This will require either the main control board or the UI board being replaced by a ...
Question about Frigidaire Ovens
...on the main control board you probably blew a thermal fuse usually located along the back wall covered by a metal plate Most likely main control board got burned. Need to change it. Expensive.... ...
Question about Whirlpool Ovens
...error code is for the control board. Considering having control board fixed or buying remanufactured one. Like to know if I am on right track. Technical sheet says all F1 codes to replace ...
Question about Electrolux Ovens
...the lower convection fan and oven lights control board. If the error code persists, I would recommend connecting with an expert repair tech to assist further and the display board may need
control board? It's very easy.. Pull your oven from wall and take screws from back of panel.. You will see control board after removing cover panel. Take screws from control board or could be attached
...control board. Thested power with a meter .. 220v OK. Still nolights, not even the "PF". ??? Circuit breaker/ switch/ fuse? Rich 619-807-8845 [email protected] i cant call you but iv seen this ...
control board will be the culprit. NOTE_ If your unit is equipped with a relay board, this will be the likely culprit, if all checks out ok. If there is no relay board present inside the unit, replace
25 questions posted
Usually answered in minutes!
924 Questions
123 Questions
119 Questions
44 Questions