Jenn-Air JGC8536 Gas Cooktop "replace burners low" Questions

...burners (two on the left side) use their own control module with electric gas valves and variable electric control switches. The burner works on low, so these are not likely the problem. Most folks ...

...The switch controlling the burner is just a voltage controlling unit (rheostat). It needs to be ...

...of all, you need to test the wiring to that burner. If there is no electricity, then you need to replace the plug in. You can get them at an Appliance parts store. If there is electricity, then

...burners working as they should, I'd check that bad one for partially plugged orifice. Try poking a small piece of wire through orifice hole to clean it. As far as igniter goes, and they are all ...

...burners. Left front burner goes to high with any setting on the switch and stays on low setting when turned off. I replaced the infinite switch on the left front burner, but problem still exists. Did ...

Front Left burner is cooking on too high of a temperture even when set on low. Please help. Rheostat for that burner is no good. Replace it.

...it works properly sometimes it just stays on. Is there a thermalcouple that can be replaced ? it is the burner switch that needs to be replaced.the thermocouple function is built in ...

...burners witch has the auto on off for extra low its the moduel under the handle Potentiometer This unit should be equiped with a re-ignition system. This is controled be a gas solinoid just under top ...

...burners, they go to medium or low but not high.  We are using propane gas.  Any ideas? hi gud day...try to remove the nozzle inside the burner base using open wrench(depend the size)the use ...

...burners that has the extra low simmer (the ones that you can set to come on and off at an interval) then you will probably need a Potentiometer kit which replaces the switches and the spark module. ...